Readers ask: 5/8 Inch To Mm?

Is 5/8 and 15mm the same?

15mm = almost 19/32 inch. 16mm = 5/8 inch.

Is 5/8 inch the same as 16mm?

yup, 16mm = 5/8″, and it’s so close that 8mm = 5/16, too! 19mm is almost interchangeable with 3/4″, and 13mm is only slightly off a 1/2″

How do you measure 5/8 of an inch?

Five-eighths inch or 5/8 inch on a ruler is a mark located between 1/2 inch and 1 inch. When the ruler divides the inches into eighths, 5/8 inch is the fifth mark on the ruler from the left side. For example, if the ruler divides the inches into 16ths, then 5/8 inch is the 10th mark.

What is 5ft 8 inches in inches?

Five feet and 8 inches is equivalent to 68 inches.

Is 8mm smaller than 10mm?

The 8mm is a smaller ring diameter, and the 10mm is a bigger ring diameter.

Why is there no 16mm wrench?

16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don’ t find them in most basic wrench / socket sets.

Whats bigger 1/2 inch or 5/8 inch?

In this case, the lowest common denominator is 8. This is what 5/8 and 1/2 look like with the same denominator: Now that these fractions have been converted to have the same denominator, we can clearly see by looking at the numerators that 5 is NOT less than 4 which also means that 5/8 is NOT less than 1/2.

You might be interested:  175 Cm In Feet?

Is there a 16 mm socket?

Capri Tools 16 mm Shallow Impact Socket, 3/8-Inch Drive, 6-Point, Metric.

Will a 1.4 socket fit a 32mm nut?

FYI: 32mm and 1 1/4 wrench are the same.

Leave a Reply

Your email address will not be published. Required fields are marked *